Semi-automatic Welder Inverter 220amp 220a Mig / Mag / Tig / Mma Weld Machine

Semi-automatic Welder Inverter 220amp 220a Mig / Mag / Tig / Mma Weld Machine
Semi-automatic Welder Inverter 220amp 220a Mig / Mag / Tig / Mma Weld Machine
Semi-automatic Welder Inverter 220amp 220a Mig / Mag / Tig / Mma Weld Machine
Semi-automatic Welder Inverter 220amp 220a Mig / Mag / Tig / Mma Weld Machine
Semi-automatic Welder Inverter 220amp 220a Mig / Mag / Tig / Mma Weld Machine
Semi-automatic Welder Inverter 220amp 220a Mig / Mag / Tig / Mma Weld Machine
Semi-automatic Welder Inverter 220amp 220a Mig / Mag / Tig / Mma Weld Machine
Semi-automatic Welder Inverter 220amp 220a Mig / Mag / Tig / Mma Weld Machine
Semi-automatic Welder Inverter 220amp 220a Mig / Mag / Tig / Mma Weld Machine
Semi-automatic Welder Inverter 220amp 220a Mig / Mag / Tig / Mma Weld Machine
Semi-automatic Welder Inverter 220amp 220a Mig / Mag / Tig / Mma Weld Machine

Semi-automatic Welder Inverter 220amp 220a Mig / Mag / Tig / Mma Weld Machine

Article: 1x Welder (MIG, MAG, MMA, TIG). Power supply: 230/240 V / 50 Hz.

Welding methods: MIG / MAG / MMA / TIG (electrode). Combined wire diameters: 0.8 / 1.0 [mm].

Covered electrode diameters: 1.6 mm - 4 mm. Welding values: 15.6 V - 25 V. Operating modes: 2T / 4T.

Dimensions: 45 x 21 x 30 [cm] [length / width / height]. Net weight: 10,5 kg. For more stuff visit our shop. It enables efficient welding of various types of material groups in a wide range of material thicknesses. The IGBTs used have a beneficial effect on lower electricity consumption, greater resistance to interference and voltage drops, and good arc characteristics.

The control panel with the description of the functions in Polish is easy to use and the operator has quick access to all functions. This improves ergonomics and work efficiency in the plant. The device has a 2T and 4T function, thanks to which it is possible to weld short and long pieces of material more precisely. An additional advantage of the machine is the BURNBACK option, i. The ability to set the burn time after welding in the range of 1 - 10.

This function has a dedicated button on the control panel. The electronics of the device are based on IGBT transistors combining the advantages of two types of transistors, easy control of field effect transistors and high breakdown voltage as well as switching speed of bipolar transistors. The welding current is very stable, which guarantees a perfect weld. Thanks to IGBT technology, the device is lighter and more economical in energy consumption. High performance and effective cooling.

Thanks to the use of IGBT transistor technology, the device efficiency is up to 60%. Built-in automatic functions for easy operation. HOT START popularly called hot start allows by temporarily increasing the welding current above the value set by the welder. HOT START works when the arc strikes and aims to prevent the electrode from sticking to the material. It is a great help when lighting the electrode.

ANTI STICK cuts off / minimizes welding voltage and current in the event of an electrode short circuit with the workpiece. ANTI STICK allows the welder to detach the electrode more easily.

ARC FORCE stabilizes the arch regardless of its length. By reducing the value of the function it gives a soft arc and a smaller depth of penetration, while by increasing the value of the function it causes deeper penetration and the possibility of short arc welding. At the highest value for the ARC FORCE function, it is possible to push the electrode into the pool of molten metal and burn through the material.

This model has automatic ARC FORCE adjustment. Socket for external wire feeder handle. The device is equipped with a connector that can be attached to the SPOOL GUN handle, which allows welding with wires and a smaller diameter than those available on the machine.

Transport of the standard / SPOOL GUN handle. The semi-automatic welding machine is equipped with a well-profiled handle that facilitates transport. Mass holder (-) : - 2 m. MMA electrode holder (+) : - 2.1m -EURO MIG / MAG holder : 4m. Current terminals: 2x 0.8 / 1x 1.0 [mm]. Rolls (double-sided) supporting the wire: 0.8 mm and 1.0 mm; type U. 1x Magnetic angle (Measuring angles : 45, 90, 135). For companies in the EU. Otherwise, please provide your name and surname.

The item "SEMI-AUTOMATIC WELDER INVERTER 220AMP 220A MIG / MAG / TIG / MMA WELD MACHINE" is in sale since Thursday, January 30, 2020. This item is in the category "Business, Office & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Welding Equipment & Accessories\Welders, Cutters & Torches\MIG Welders". The seller is "easyparts_uk" and is located in Wroclaw. This item can be shipped worldwide.


Semi-automatic Welder Inverter 220amp 220a Mig / Mag / Tig / Mma Weld Machine


Mig Welder Inverter  Sitemap  Contact  Privacy Policy  Terms of Use