200AMP MIG Inverter Welder Welding machine MIG / MAG / TIG / FCAW / MMA 220V

200AMP MIG Inverter Welder Welding machine MIG / MAG / TIG / FCAW / MMA 220V
200AMP MIG Inverter Welder Welding machine MIG / MAG / TIG / FCAW / MMA 220V
200AMP MIG Inverter Welder Welding machine MIG / MAG / TIG / FCAW / MMA 220V
200AMP MIG Inverter Welder Welding machine MIG / MAG / TIG / FCAW / MMA 220V
200AMP MIG Inverter Welder Welding machine MIG / MAG / TIG / FCAW / MMA 220V
200AMP MIG Inverter Welder Welding machine MIG / MAG / TIG / FCAW / MMA 220V
200AMP MIG Inverter Welder Welding machine MIG / MAG / TIG / FCAW / MMA 220V
200AMP MIG Inverter Welder Welding machine MIG / MAG / TIG / FCAW / MMA 220V
200AMP MIG Inverter Welder Welding machine MIG / MAG / TIG / FCAW / MMA 220V
200AMP MIG Inverter Welder Welding machine MIG / MAG / TIG / FCAW / MMA 220V

200AMP MIG Inverter Welder Welding machine MIG / MAG / TIG / FCAW / MMA 220V

[Sango Ichi Multifunctional Welder] MIG 255 offers ARC welding mode, TIG welding, and MIG welding mode, and really realizes welding function 3 go 1. It has a 2 T / 4 T mode switching function and is suitable for spot welding and long welding. Has overcurrent protection, overpressure protection, and overheat protection. The machine has a built-in wire plate axle.

No plug, 1 kg / 5 kg 0.8-1.0 mm wire plate is applied. The plug is a three-hole plug.

[Gas-free welding] Gas & gasless -1kg / 5kg 0.8-1.0mm (0.03 "-0.039") Solid wire (iron for gas welding); 0.8-1.0mm Flux-filled wire (without gas welding) Carbon steel and stainless steel. In normal gas welding mode, the polarity can be changed to weld the drug core. Realizes gas welding that does not really use gas. When using the DC tangential method, the ground clamp is connected to the positive electrode and a polarity switch is required, that is, the wire connecting rod is connected to the negative electrode. [MIG welding] Output current range: MIG 25-200A; MIG 255 centralized adjustment can automatically achieve current-voltage matching. Even beginners can easily adjust welding parameters. Welders can perform higher quality welds on plates of different thicknesses with fine-tuning voltage and arc characteristics.

[TIG welding] Output current range: TIG 10-200A Suitable for welding thin plates of 0.8 mm to 1.2 mm or more. The automatic delay control of TIG welding gas removes the arc punch and the initial forming of the bead is beautiful.

We guarantee for one year and present consumables. As a responsible company, we guarantee quality for one year. MIG255-3 in 1 MIG welding machine. MIG 255 offers ARC welding mode, TIG welding, MIG welding mode, and really realizes welding function 3 go 1. A 1 kg / 5 kg 0.8-1.0 mm wire plate is applied. Gas & Gasless-1kg / 5kg 0.8-1.0mm (0.03 "-0.039") Solid Wire (Iron for Gas Welding); 0.8-1.0mm Fluxed Wire (No Gas Welding) Carbon Steel and Stainless Steel. Output current range: TIG 10-200A Suitable for welding thin plates of 0.8 mm to 1.2 mm or more. It has a good arc and a constant output during welding, which has the optimum effect on both the forming of the weld bead and the inherent quality. This is an example of good welding with uniform pace and penetration. Reference opinion at the time of beginner welding. Weld the surface clean and make sure it is free of paint, rust, greasy, dirt and other materials. Very convenient to clean and prepare. For example, use a grinding machine, a wire brush, or compressed air. If you want to use clean exposed metal. Also, be careful not to use chemical solvents to prepare and clean unless it is determined that it will not be decomposed into harmful gases. Many solvents, such as brake cleaners, are widely used for surface cleaning during car repairs. However, there are still a small amount of chemicals left inside that contain some detergents. These trace chemicals can then be further decomposed during the welding process into extremely harmful gases. If the movement is too fast or too slow, it will affect all aspects of the weld. When welding, repeat the lowercase "e" or "u" to control the speed and maintain the flow of the molten pool. The torch keeps a certain distance from the molten pool. Pay attention to the air flow. When the torch is applied, the gas drops horizontally and adjusts the setting. For beginners, this machine is a good choice.

Easy to operate and control, it can be used with the wire or gas of the drug core. TIG:10-200 A ;MMA:10-200A ; MIG:25-200 A. Chemical core wire and solid wire. The item "200AMP MIG Inverter Welder Welding machine MIG / MAG / TIG / FCAW / MMA 220V" is in sale since Thursday, May 27, 2021.

This item is in the category "Business, Office & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Welding Equipment & Accessories\Welders, Cutters & Torches\MIG Welders". The seller is "dalishilock" and is located in Leicester.

This item can be shipped to United Kingdom.


200AMP MIG Inverter Welder Welding machine MIG / MAG / TIG / FCAW / MMA 220V


Mig Welder Inverter  Sitemap  Contact  Privacy Policy  Terms of Use